 |
Chemical
name: methyl
tetrahydrophthalic anhydride
Molecular formula:C9H10O3
Constitutional formula: 
Relative
molecular weight: 166.178(according to International Relative Atomic
Mass of the year 1987)
Performance Characteristics:
High purity and pale colour: It can be directly made into or mixed
into epoxy resin products with different colours as desired.
Low viscosity: Processing properties such as casting, filling and
sealing, and impregnating are good. A large amount of filling agent
can be added when casting is underway so as to make the cured compound
perform well.
It is stable in performance and has a low freezing point. It has a
long service life and can be stored at room temperature enduringly.
Low volatility and low toxicity. The loss on heating is low, and its
toxicity is only as 5% to 2.5% as the toxicity of amine curing agents.
Good mutually soluble performance. The product can be mutually soluble
with all epoxy resins, and the viscosity on mixing is low. At the
same time, when the mixture system is heated for curing, it shows
a low contraction percentage.
This product is a new-type of fine chemical product, which is essential
to electronics, electromechanical industries. It finds wide applications
in many processes such as filling and sealing, casting, encapsulating,
laminating, adhesive bonding and winding.
Product types and applications:
The three types of ANY1001, ANY1002, ANY1008 made by our factory are
available.
The type of ANY-1001 has pale colour and low viscosity. Its colour
remains unchanged after accelerating agent is added to it, and it
has few gas bubbles. So it is especially suited for the white filling
and sealing process.
The type of ANY-1002 is a pale yellow and transparent liquid, and
it has moderate viscosity. It is generally applied in processes such
as casting, pultrusion and winding.
The type of ANY-1008 is a new product, which is developed on the basis
of ANY-1001. In addition to advantages of ANY-1001, it also has the
advantages of having even fewer gas bubbles and even lower viscosity.
Thus, it is more favourable for the pipelining operation, and an ideal
product for replacing the imported counterpart.
Formulation:
The customer can choose the desirable product types and their proper
quantity, the product types include epoxy resin, accelerating agent,
filling materials, toughening agent and active diluting agent. An
ideal formulation can be obtained by the small-sample test.
Reference conditions for the curing
process:
Take 100 fraction of E-type epoxy resin, 80 fraction of ANY-1002 and
0.2-0.5 fraction of the above said accelerating agent and mix them
proportionally. Debubble the mixture at 60-70¡æ. Then the mixture is
kept at 100¡æ for 2 hours, and at 120-150¡æ for 4-10 hours. The temperatures
and time at the post-phase are determined based upon the volume of
cured compound and actual process conditions.
|
Item
Type |
ANY1002 |
ANY1001 |
ANY1008 |
| Appearance |
pale
yellow and transparent liquid, impurity-free |
| Color
and luster(Pt.- Co.) |
300# |
200# |
200# |
| Density£¬g/cm3£¬20¡æ |
1.21¡À0.05 |
Crystallizing
point£¬¡æ¡¡£¼
|
|
-15 |
|
| Viscosity£¬Pa.s
25¡æ |
¡Ü0.060 |
¨Q0.045 |
¨Q0.040 |
| Acid
number£¬mgKOH/g |
660-685 |
|
|
| Content
of anhydride group£¬%£¬¡Ý |
40.5 |
|
|
| Loss
on heating,%,120¡æ¡Ü |
2.00 |
|
|
| Free
acid,% |
¨Q0. 5 |
|
|
|
|
